? 221 west industry court deer park, ny 11729-4681 phone (631) 586 7600 fax (631) 242 9798 ? ? world wide web - h ttp://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 2020, rev, a three phase full wave bridge rectifier assembly description: a 200/400/600 volt, 22 amp, 85 nanosecond three phase bridge rectifier assembly. max. ratings / electrical characteristics all ratings are at t a = 25 o c unless otherwise specified. rating conditions min typ max unit peak inverse voltage (piv) s455dc s455fc s455gc - - - 200 400 600 vdc average dc output current (t c = case temp) (i o ) t c = 55 o c t c = 100 o c - - 22 15 amps peak single cycle surge current (i fsm ) t p = 8.3 ms single half cycle sine wave, superimposed on rated load - - 100 amps(pk) peak recurring surge current (i frm ) t a = 25 o c - - 50 amps operating and storage temp. (t op & t stg ) - -55 - +150 c maximum forward voltage per leg (v f ) i f = 9.0adc (300 sec pulse, duty cycle < 2%) - - 1.75 volts maximum instantaneous reverse current at rated (piv) t a = 25 c t a = 100 c - - 5.0 100 amps reverse recovery time (t rr ) i f = 0.5a, i r = 1.0a; i rr = 0.25a measured on discrete rectifiers prior to assembly. - - 85 nsec max. thermal resistance (r jc ) - - - 1.25 c/w s455dc s455fc s455gc
? 221 west industry court deer park, ny 11729-4681 phone (631) 586 7600 fax (631) 242 9798 ? ? world wide web - h ttp://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 2020, rev. a mechanical dimensio ns: in inches / mm note: case finish - black anodized s455dc s455fc s455gc ac ac ac + ? ac ac ac + ? .89 .85 (22.61 21.59) .157 .137 (3.99 3.48) dia .89 .85 (22.61 21.59) .500(12.70) min .160 .140 (4.06 3.56) 4 places .055 .045 (1.40 1.14) 5 places through hole .39 .35 (9.91 8.89) .21 .17 (5.33 4.32 ) dia x .245 .225 (6.22 5.72) deep .160 .140 (4.06 3.56) fig. 455 disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
